![]() You should not need any tools, although if the sleeve has jammed for some reason you may require a rubber strap wrench.Ĥ. Unscrew the existing air sleeve, remove it from the shock and set it aside. Remove the travel indicator o-ring and set it aside (don't lose it).ģ. Record your existing air pressure, then depressurise the shock. Remove any reducer hardware from the eyelets (beige IGUS polymer bushings & DU bushings may remain in the eyelets however).Ģ. We recommend cleaning with isopropyl alcohol. Remove your shock from the bike and clean it thoroughly. Be particularly attentive to the instructions for REMOVAL of the sleeve, listed at the bottom!ġ. You may also need to alter your volume spacer configuration as per FOX'S VOLUME SPACER INSTALLATION INSTRUCTIONS. First, refer to FOX'S AIR SLEEVE MAINTENANCE INSTRUCTIONS for the entire duration of this procedure. Thank you for purchasing a Corset air sleeve upgrade kit for your Fox shock! These sleeves are very easy to install.
0 Comments
Leave a Reply. |